After the plate and frame automatic filter press is used for a period of time, material leakage will occur. This problem is a lot of sand washing production line often encountered problems. If this problem occurs, it will greatly affect the effect of the plate and frame automatic filter press. Therefore, the plate and frame automatic filter press needs to deal with the problem as soon as possible to prevent injury. Since it is a difficult problem in the entire process of production line application, it is not difficult to investigate, resulting in leakage of the plate and frame automatic filter press, and some simple solutions.

Plate and frame automatic filter press leak root cause:

The 1. filter cloth has been used for a long time and does not pay attention to cleaning. The raw materials remain on it and block the filter holes. As a result, the filter cloth is not worried and material leakage will occur. Sometimes, improper placement of the filter cloth may also cause the material to run. There are many reasons why the plate and frame automatic filter filter cannot be sealed. Close the filter to see if the filter cloth is pleated or the edge of the filter cloth is incomplete. Because the structure of the filter chamber is composed of filter plate and filter cloth inserted into each other by strong pressure.

2. the general filter is applied to the corresponding period, or in high temperature conditions, the filter plate is easy to deform, resulting in mild unevenness, there may be leakage.

under the condition of 3. continuous high temperature, the cloth clamp is deformed or the cloth clamp is too loose, which may also lead to material leakage. Therefore, when you see that the cloth clamp is deformed, you should immediately disassemble and replace it.

the 4. clamping pressure is not enough, or the pressure is too large, the plate and frame filter press may also cause material leakage. Customers often feel that the greater the pressure of the pressure filter, the faster the filtration speed, which is wrong. Filter plates and filters The filter needs to complete the closed filter chamber structure under strong working pressure. When the working pressure is insufficient, the working pressure of the filter filter increases the burden on the filter filter, and of course, the filter will seep from the gap.

5., many customers gradually do not understand that the filter is fixed with four legs, the pressure is high, the sound card frame is easily deformed, the frame of the plate and frame automatic filter press manufacturer is deformed, the filter plate is uneven, the filter shape is not a closed space, and it is likely to cause Material leakage. The other part is part of the material operation, that is, the problem of the material anti-corrosion pipe. At this time, it can be disassembled to see if the anti-corrosion pipe is damaged.

Therefore, users in the purchase of plate and frame automatic filter press, should pay attention to maintenance.