No matter what kind of mechanical equipment is used, when the operation is superior, the work efficiency is higher, and the filter plate is the same. Adjusting the specifications and basic parameters can naturally ensure a stronger expected effect on sludge disposal. However, for sludge disposal enterprises that do not have the working experience of filter plates of filter presses, what key links should be taken care of when adjusting the expected effect of sludge disposal? From which aspect?

When assembling the filter plate machine equipment, it should be noted that there is no unclean thing or large sludge particles in the middle of the filter plate. When the telescopic plate, large sludge particles or unclean things can cause the filter element filter or filter press filter cloth.

In addition to the above key links, should pay attention to the following aspects:

1. Carefully check whether the joint is firm and whether the running touch of each component is superior. If any abnormality is found, the maintenance personnel should be informed to repair it immediately. The filter plate of the filter shall conduct the cable sheath and reliability test of the electronic component control system on time. If it is found that the attitude caused by electrical components is not particularly sensitive, it should be repaired or disassembled in time.

2, should maintain the pull plate car, sprocket chain, roller bearings, hydraulic oil cylinder and other prefabricated components, so that the coordination of prefabricated components to maintain clean, stable and superior efficacy. The operation manual of the hydraulic filter press ensures that the posture is agile and the push is pushed. The synchronization between the cart and the chain hanging should be adjusted immediately.

3. The maintenance of the hydraulic transmission system is mainly to regularly maintain the tightness of the hydraulic transmission system and the jack. If the filter plate is not used for a long time, the flat filter plate should be cleaned and cleaned and discharged to the frame of the belt filter press. Clean and dry the filter plate of the filter; the hydraulic cylinder is exposed, and the field effect tube should be coated with margarine.

4, often check the protruding surface of the filter plate, to ensure that it is clean and tidy; Before touching, the filter cloth of the filter press should be carefully and carefully to ensure that the filter plate of the filter is not telescopic, damaged, free of coal ash and smooth. Ensure the efficacy of the filter plate of the filter; the filter plate of the filter press should be cleaned from beginning to end to ensure superior leachate penetration.